Models made in titanium are printed in titanium powder that is sintered together by a laser to produce end-use metal parts that are as equally good as machined models. Models in titanium are very strong, precise and can have feature size as small as 0.1 mm. The color of the material is light gray. It can be polished to a very nice shine and reflective surface. The technique used to build your design with titanium is direct metal laser sintering (DMLS). It’s similar to the selective laser sintering technology but instead of polyamide, a fine metal powder is used build your model layer by layer. The powder is sintered and solidified by a laser beam that moves over a box filled with powder in minute layers. After each layer a new layer of powder is applied. Your intact model is then lifted from the powder bed. If your model needs support structures to keep the model structurally sound or to support it while the 3D printer builds it, the titanium support structures have to be removed manually.
- The Min. wall thickness for the material shouldn’t be less than 0.2 mm and the minimum detail size can be 0.1 mm.
- Titanium is jewelry safe and biocompatible so we expect no problem with allergies.
- The benefits of the material are that it is the strongest material you can currently 3D print.
- Titanium is also a high value material that is currently already being used for high end jewelry and watches.
200 x 250 x 400 mm
(7.9 x 9.8 x 15.7 inch)
Min. wall thickness